bzx84-v-series www.vishay.com vishay semiconductors rev. 1.9, 08-dec-11 1 document number: 85763 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? these diodes are also available in other case styles and other configurations including: the sod-123 case with type designation bzt52 series, the zener diode common anode configuration in the sot-23 case with type designation az23 series and the zener diode common cathode configuration in the sot-23 case with type designation dz23 series ? the zener voltages are graded according to the international e 24 standard. standard zener voltage tolerance is 5 %. replace c with b for 2 % to lerance. ? silicon planar power zener diodes ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec primary characteristics parameter value unit v z range nom. 2.4 to 75 v test current i zt 2; 5 ma v z specification pulse current int. construction single 20421 1 2 3 ordering information device name ordering code taped units per reel minimum order quantity bzx84-v-series bzx84-v-series-gs18 10 000 (8 mm tape on 13" reel) 10 000 bzx84-v-series bzx84-v-series-gs08 3000 (8 mm tape on 7" reel) 15 000 package package name weight molding compound flammability rating moisture sensitivity level soldering conditions sot-23 8.8 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings parameter test condition symbol value unit power dissipation t amb = 25 c, device on fiberglass substrate, acc. layout on page 7 p tot 300 mw thermal resistance junction to ambient air t amb = 25 c, device on fiberglass substrate, acc. layout on page 7 r thja 420 k/w junction temperature t j 150 c storage temperature range t stg - 65 to + 150 c
bzx84-v-series www.vishay.com vishay semiconductors rev. 1.9, 08-dec-11 2 document number: 85763 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range test current reverse leakage current dynamic resistance f = 1 khz temperature coefficient v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 d vz at i zt1 v ma a v : 10 -4 /c min. nom. max. max. max. min. max. bzx84c2v4-v z11 2.2 2.4 2.6 5 1 50 1 100 275 - 9 - 4 bzx84c2v7-v z12 2.5 2.7 2.9 5 1 20 1 100 600 - 9 - 4 bzx84c3v0-v z13 2.8 3.0 3.2 5 1 10 1 95 600 - 9 - 3 bzx84c3v3-v z14 3.1 3.3 3.5 5 1 5 1 95 600 - 8 - 3 bzx84c3v6-v z15 3.4 3.6 3.8 5 1 5 1 90 600 - 8 - 3 bzx84c3v9-v z16 3.7 3.9 4.1 5 1 3 1 90 600 - 7 - 3 bzx84c4v3-v z17 4.0 4.3 4.6 5 1 3 1 90 600 - 6 - 1 bzx84c4v7-v z1 4.4 4.7 5.0 5 1 3 2 80 500 - 5 2 bzx84c5v1-v z2 4.8 5.1 5.4 5 1 2 2 60 480 - 3 4 BZX84C5V6-v z3 5.2 5.6 6.0 5 1 1 2 40 400 - 2 6 bzx84c6v2-v z4 5.8 6.2 6.6 5 1 3 4 10 150 - 1 7 bzx84c6v8-v z5 6.4 6.8 7.2 5 1 2 4 15 80 2 7 bzx84c7v5-v z6 7.0 7.5 7.9 5 1 1 5 15 80 3 7 bzx84c8v2-v z7 7.7 8.2 8.7 5 1 0.7 5 15 80 4 7 bzx84c9v1-v z8 8.5 9.1 9.6 5 1 0.5 6 15 100 5 8 bzx84c10-v z9 9.4 10 10.6 5 1 0.2 7 20 150 5 8 bzx84c11-v y1 10.4 11 11.6 5 1 0.1 8 20 150 5 9 bzx84c12-v y2 11.4 12 12.7 5 1 0.1 8 25 150 6 9 bzx84c13-v y3 12.4 13 14.1 5 1 0.1 8 30 170 7 9 bzx84c15-v y4 13.8 15 15.6 5 1 0.05 10.5 30 200 7 9 bzx84c16-v y5 15.3 16 17.1 5 1 0.05 11.2 40 200 8 9.5 bzx84c18-v y6 16.8 18 19.1 5 1 0.05 12.6 45 225 8 9.5 bzx84c20-v y7 18.8 20 21.2 5 1 0.05 14.0 55 225 8 10 bzx84c22-v y8 20.8 22 23.3 5 1 0.05 15.4 55 250 8 10 bzx84c24-v y9 22.8 24 25.6 5 1 0.05 16.8 70 250 8 10 bzx84c27-v y10 25.1 27 28.9 2 0.5 0.05 18.9 80 300 8 10 bzx84c30-v y11 28 30 32 2 0.5 0.05 21.0 80 300 8 10 bzx84c33-v y12 31 33 35 2 0.5 0.05 23.1 80 325 8 10 bzx84c36-v y13 34 36 38 2 0.5 0.05 25.2 90 350 8 10 bzx84c39-v y14 37 39 41 2 0.5 0.05 27.3 130 350 10 12 bzx84c43-v y15 40 43 46 2 0.5 0.05 30.1 150 375 10 12 bzx84c47-v y16 44 47 50 2 0.5 0.05 32.9 170 375 10 12 bzx84c51-v y17 48 51 54 2 0.5 0.05 35.7 180 400 10 12 bzx84c56-v y18 52 56 60 2 0.5 0.05 39.2 200 425 9 11 bzx84c62-v y19 58 62 66 2 0.5 0.05 43.4 215 450 9 12 bzx84c68-v y20 64 68 72 2 0.5 0.05 47.6 240 475 10 12 bzx84c75-v y21 70 75 79 2 0.5 0.05 52.5 255 500 10 12
bzx84-v-series www.vishay.com vishay semiconductors rev. 1.9, 08-dec-11 3 document number: 85763 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bzx84b2v4-v z50 2.35 2.4 2.45 5 1 50 1 100 275 - 9 - 4 bzx84b2v7-v z51 2.65 2.7 2.75 5 1 20 1 100 600 - 9 - 4 bzx84b3v0-v z52 2.94 3.0 3.06 5 1 10 1 95 600 - 9 - 3 bzx84b3v3-v z53 3.23 3.3 3.37 5 1 5 1 95 600 - 8 - 3 bzx84b3v6-v z54 3.53 3.6 3.67 5 1 5 1 90 600 - 8 - 3 bzx84b3v9-v z55 3.82 3.9 3.98 5 1 3 1 90 600 - 7 - 3 bzx84b4v3-v z56 4.21 4.3 4.39 5 1 3 1 90 600 - 6 - 1 bzx84b4v7-v z57 4.61 4.7 4.79 5 1 3 2 80 500 - 5 2 bzx84b5v1-v z58 5.0 5.1 5.2 5 1 2 2 60 480 - 3 4 bzx84b5v6-v z59 5.49 5.6 5.71 5 1 1 2 40 400 - 2 6 bzx84b6v2-v z60 6.08 6.2 6.32 5 1 3 4 10 150 - 1 7 bzx84b6v8-v z61 6.66 6.8 6.94 5 1 2 4 15 80 2 7 bzx84b7v5-v z62 7.35 7.5 7.65 5 1 1 5 15 80 3 7 bzx84b8v2-v z63 8.04 8.2 8.36 5 1 0.7 5 15 80 4 7 bzx84b9v1-v z64 8.92 9.1 9.28 5 1 0.5 6 15 100 5 8 bzx84b10-v z65 9.8 10 10.2 5 1 0.2 7 20 150 5 8 bzx84b11-v z66 10.8 11 11.2 5 1 0.1 8 20 150 5 9 bzx84b12-v z67 11.8 12 12.2 5 1 0.1 8 25 150 6 9 bzx84b13-v z68 12.7 13 13.3 5 1 0.1 8 30 170 7 9 bzx84b15-v z69 14.7 15 15.3 5 1 0.05 10.5 30 200 7 9 bzx84b16-v z70 15.7 16 16.3 5 1 0.05 11.2 40 200 8 9.5 bzx84b18-v z71 17.6 18 18.4 5 1 0.05 12.6 45 225 8 9.5 bzx84b20-v z72 19.6 20 20.4 5 1 0.05 14 55 225 8 10 bzx84b22-v z73 21.6 22 22.4 5 1 0.05 15.4 55 250 8 10 bzx84b24-v z74 23.5 24 24.5 5 1 0.05 16.8 70 250 8 10 bzx84b27-v z75 26.5 27 27.5 2 0.5 0.05 18.9 80 300 8 10 bzx84b30-v z76 29.4 30 30.6 2 0.5 0.05 21 80 300 8 10 bzx84b33-v z77 32.3 33 33.7 2 0.5 0.05 23.1 80 325 8 10 bzx84b36-v z78 35.3 36 36.7 2 0.5 0.05 25.2 90 350 8 10 bzx84b39-v z79 38.2 39 39.8 2 0.5 0.05 27.3 130 350 10 12 bzx84b43-v z80 42.1 43 43.9 2 0.5 0.05 30.1 150 375 10 12 bzx84b47-v z81 46.1 47 47.9 2 0.5 0.05 32.9 170 375 10 12 bzx84b51-v z82 50 51 52 2 0.5 0.05 35.7 180 400 10 12 bzx84b56-v z83 54.9 56 57.1 2 0.5 0.05 39.2 200 425 9 11 bzx84b62-v z84 60.8 62 63.2 2 0.5 0.05 43.4 215 450 9 12 bzx84b68-v z85 66.6 68 69.4 2 0.5 0.05 47.6 240 475 10 12 bzx84b75-v z86 73.5 75 76.5 2 0.5 0.05 52.5 255 500 10 12 electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range test current reverse leakage current dynamic resistance f = 1 khz temperature coefficient v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 d vz at i zt1 v ma a v : 10 -4 /c min. nom. max. max. max. min. max.
bzx84-v-series www.vishay.com vishay semiconductors rev. 1.9, 08-dec-11 4 document number: 85763 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward characteristics fig. 2 - admissible power dissipation vs. ambient temperature fig. 3 - dynamic resistance vs. zener current fig. 4 - dynamic resistance vs. zener current fig. 5 - dynamic resistance vs. zener current fig. 6 - thermal differential resistance vs. zener voltage 18114 ma 10 3 10 2 10 -1 10 -2 10 -3 10 -4 10 -5 10 1 i f v f 0 0.2 0.4 0.6 0.8 1v t j = 100 c t j = 25 c 18115 mw 400 100 0 300 200 p tot t amb 0 100 200 c 500 18117 1000 54 3 2 5 4 3 2 100 1 r zj 0.1 2 5 2 5 1 10 i z t j = 25 c 2.7 54 3 2 10 2 5 100 ma 3.6 4.7 5.1 5.6 18119 100 54 3 2 5 4 3 2 10 r zj 0.1 2 5 2 5 1 10 i z 1 2 5 100 ma t j = 25 c 33 27 22 18 15 12 10 6.8/8.2 6.2 18120 10 3 75 4 3 2 7 5 4 3 2 10 0.1 2 3 4 5 2 3 4 5 1 10 ma r zj i z t j = 25 c 47 + 51 43 39 36 10 2 18121 10 3 54 3 2 5 4 3 2 10 2 1 r zth 54 3 2 10 k/w 1 2 3 4 5 2 3 4 5 10 100 v v z at i z = 5 ma negative positive ? ? v z t j r zth = r tha x v z x
bzx84-v-series www.vishay.com vishay semiconductors rev. 1.9, 08-dec-11 5 document number: 85763 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - dynamic resistance vs. zener voltage fig. 8 - temperature dependence of zener voltage v s. zener voltage fig. 9 - change of zener voltage vs. junction temp erature fig. 10 - temperature dependence of zener voltage vs. zener voltage fig. 11 - change of zener voltage vs. junction tem perature fig. 12 - change of zener voltage from turn-on up to the point of thermal equilibrium vs. zener voltage 18122 100 75 4 3 2 7 5 4 3 2 1 r zj 10 t j = 25 c i z = 5 ma 1 2 3 4 5 2 3 4 5 10 100 v v z 18123 ? 25 20 15 10 50 - 5 mv/c ? v z t j 1 2 3 4 5 2 3 4 5 10 100 v v z 5 ma 1 ma 20 ma i z = 18124 v z at i z = 5 ma 25 15 10 8 7 6.2 5.9 5.6 5.1 4.7 3.6 0.8 0.70.6 0.5 0.4 0.3 0.2 0.1 0 - 1 - 0.2 v z v t j 0 20 40 60 80 100 120 140 c ? 18125 ? 100 80 60 40 20 0 mv/c ? v z t j 0 20 40 80 60 100 v v z i z = 5 ma 18126 ? 9 75 3 1 - 1 v v z 8 64 2 0 0 100 60 t j 20 40 120 80 140 c i z = 2 ma 51 43 36 18127 ? 1.6 1.20.8 0.4 0 - 0.4 v v z 1.4 1 0.60.2 - 0.2 1 2 3 4 5 2 3 4 5 10 100 v v z at i z = 5 ma v z = r zth x i z ?
bzx84-v-series www.vishay.com vishay semiconductors rev. 1.9, 08-dec-11 6 document number: 85763 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 13 - change of zener voltage from turn-on up to the point of thermal equilibrium vs. zener voltage fig. 14 - breakdown characteristics fig. 15 - breakdown characteristics fig. 16 - breakdown characteristics 18128 ? 5 43 2 1 0 v v z 0 20 40 60 80 100 v v z i z = 5 ma i z = 2 ma v z = r zth x i z ? 18111 test current i z 5 ma 1 2 3 4 5 6 7 8 9 0 10 v v z 3.3 3.9 5.6 2.7 ma 50 40 30 20 10 0 l z t j = 25 c 8.2 6.8 4.7 18112 10 20 30 0 40 v v z ma 30 20 10 0 l z 33 test current i z 5 ma t j = 25 c 10 12 15 18 22 27 36 18113 ma 10 86 4 2 0 l z 10 20 30 40 50 60 70 80 90 0 100 v v z 43 39 test current i z 5 ma t j = 25 c 47 51
bzx84-v-series www.vishay.com vishay semiconductors rev. 1.9, 08-dec-11 7 document number: 85763 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 layout for r t ; ja test thickness: fiberglass 0.059" (1.5 mm) copper leads 0.012" (0.3 mm) package dimensions in millimeters (inches): sot-23 17451 15 (0.59) 12 (0.47) 0.8 (0.03) 5 (0.2) 7.5 (0.3) 3 (0.12) 1 (0.4) 1 (0.4) 2 (0.8) 2 (0.8) 1.5 (0.06) 5.1 (0.2) foot print recommendation: rev. 8 - date: 23. s ept.2009 17418 document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.95 (0.037) 0.95 (0.037) 2 (0.079) 0.7 (0.028) 0.9 (0.035) 0 to 8 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are su bject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents , and employees, and all persons acting on its or t heir behalf (collectively, vishay), disclaim any and all liability for any e rrors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. vishay makes no warranty, representation or guarant ee regarding the suitability of the products for an y particular purpose or the continuing production of any product. to the m aximum extent permitted by applicable law, vishay d isclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products fo r certain types of applications are based on vishay s knowledge of typical requirements that are often placed on vishay produc ts in generic applications. such statements are no t binding statements about the suitability of products for a particular application. it is the customers responsibility t o validate that a particular product with the properties described in the produc t specification is suitable for use in a particular application. parameters provided in datasheets and/or specifications may va ry in different applications and performance may va ry over time. all operating parameters, including typical parameters, must be validated for each customer application by the customers technical experts. product specifications do not ex pand or otherwise modify vishays terms and conditio ns of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay pr oducts are not designed for use in medical, life-sav ing, or life-sustaining applications or for any other application in which the failure of the vishay product could result in p ersonal injury or death. customers using or selling vishay products not expr essly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold vishay and its distribut ors harmless from and against any and all claims, l iabilities, expenses and damages arising or resulting in connection with suc h use or sale, including attorneys fees, even if suc h claim alleges that vishay or its distributor was negligent regarding the desi gn or manufacture of the part. please contact auth orized vishay personnel to obtain written terms and conditions regarding produ cts designed for such applications. no license, express or implied, by estoppel or othe rwise, to any intellectual property rights is grant ed by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. material category policy vishay intertechnology, inc. hereby certifies that all its products that are identified as rohs-compliant fulfill the definitions and restrictions defined under directiv e 2011/65/eu of the european parliament and of the council of june 8, 2011 on the restriction of the use of ce rtain hazardous substances in electrical and electr onic equipment (eee) - recast, unless otherwise specified as non-c ompliant. please note that some vishay documentation may stil l make reference to rohs directive 2002/95/ec. we c onfirm that all the products identified as being compliant to d irective 2002/95/ec conform to directive 2011/65/eu .
|
